Richard iii

California High School Exit Examination (CAHSEE) The California High School Exit Examination (CAHSEE), formerly a graduation requirement for students in California public schools, was suspended effective January 1, 2016. Below is information regarding the suspension of the CAHSEE, results and Richard, reports from previous administrations of the CAHSEE, and historical information. For more information about the CAHSEE, contact your local school district. The CAHSEE - CalEdFacts page provides a more detailed overview of the exam. The information below was developed to provide assistance to various groups that are directly involved with, or have an interest in, the CAHSEE. Beginning with the Class of 2006, students in profile, California public schools were required to pass the California High School Exit Examination (CAHSEE) to Richard iii demonstrate competency in grade-level skills in reading, writing, and mathematics to sentences earn a high school diploma. The content of the CAHSEE was based on content standards in English-language arts and mathematics that were adopted by the State Board of Education (SBE) in Richard, 2003. In 2010, the essay questions, SBE adopted the Common Core State Standards in Englishlanguage arts and iii, mathematics. Due to the change in academic standards, Senate Bill 172 (Liu) was signed by the Governor to suspend the administration of the CAHSEE and the requirement that students pass the CAHSEE to receive a high school diploma for the 201516, 201617, and 201718 school years.

The law required that schools grant a diploma to Ethnography any pupil who completed grade twelve in the 200304 school year or a subsequent school year and met all applicable graduation requirements other than the passage of the high school exit examination. The law further required the State Superintendent of Public Instruction to convene an advisory panel to provide recommendations to the Superintendent on the continuation of the high school exit examination and on alternative pathways to satisfy the Richard, high school graduation requirements pursuant to Education Code sections 51224.5 and 51225.3. The law became effective on January 1, 2016. Questions and answers about the suspension of the CAHSEE. Letter from Superintendent Torlakson to essay revisor provide information on the signing of Senate Bill 725.

This document provides an explanation of the 2014-15 CAHSEE summary results to the public. It also provides additional information for school and district staff to assist them in responding to questions from the public. Reports since 2001 from the independent evaluator for Richard iii the CAHSEE. CAHSEE annual technical reports and other studies. Overview of the California High School Exit Examination (CAHSEE). The primary purpose of the California High School Exit Examination (CAHSEE) was to significantly improve student achievement in tesl journal research, public high schools and to ensure that students who graduated from Richard iii, public high schools demonstrated grade level competency in reading, writing, and mathematics. Essay Revisor. The CAHSEE helped identify students who were not developing skills that are essential for iii life after high school and encouraged districts to give these students the attention and resources needed to help them achieve these skills during their high school years. All California public school students, except eligible students with disabilities, were required satisfy the CAHSEE requirement, as well as all other state and local requirements, in order to receive a high school diploma. The CAHSEE requirement could be satisfied by passing the examination or, for eligible students with disabilities, meeting the exemption requirement pursuant to California Education Code (EC) Section 60852.3, or receiving a local waiver pursuant to EC Section 60851(c). The CAHSEE had two parts: Englishlanguage arts (ELA) and mathematics. The ELA part addressed state content standards through grade ten.

In reading, this included vocabulary, decoding, comprehension, and analysis of information and literary texts. In writing, this covered writing strategies, applications, and the conventions of English (e.g., grammar, spelling, and punctuation). The mathematics part of the CAHSEE addressed state standards in grades six and seven and Algebra I. The exam included statistics, data analysis and probability, number sense, measurement and geometry, mathematical reasoning, and algebra. Students were also asked to demonstrate a strong foundation in computation and arithmetic, including working with decimals, fractions, and percents. After determining that local proficiency standards, established pursuant to EC Section 51215 (repealed January 1, 2000), were generally set below a high school level and were not consistent with the state's content standards, the Legislature indicated its intent to set higher standards for galloway gaming algorithmic culture high school graduation. In proposing the iii, CAHSEE, the Legislature's primary goal was to . significantly improve pupil achievement in high school and to galloway gaming culture ensure that pupils who graduate from high school can demonstrate grade level competency in reading, writing, and mathematics. (Senate Bill 2, Section 1[b]). EC Section 60850 (Chapter 1, statutes of 1999-2000, S.B.2, O'Connell) authorized the iii, CAHSEE to be developed in accordance with State Board of Education (SBE)-adopted content standards in ELA and customer, mathematics. The CAHSEE was developed based on recommendations of the High School Exit Examination Standards Panel, whose members were appointed by the State Superintendent of Public Instruction and Richard, approved by the SBE.

State law required that the CAHSEE be administered only on the dates designated by the State Superintendent of Public Instruction. Students were required retake the examination until the good essay, ELA and mathematics parts were passed; however, students could retake only those parts not previously passed. All students were required to take the CAHSEE for the first time in Richard iii, grade ten. Students who did not pass one or both parts of the study, CAHSEE in grade ten could take the parts not passed up to Richard two times per school year in customer case, grade eleven and iii, up to five times per school year in grade twelve. Adult students could take the good sentences, parts not passed up to Richard iii three times per customer school year. The CAHSEE was offered for the first time in spring 2001 (March and May) to iii volunteer ninth graders (class of 2004). In October 2001, Assembly Bill 1609 (Calderon) removed the option for ninth graders to take the CAHSEE beginning with the 2002 administration. The CAHSEE was next administered in profile questions, spring 2002 to all tenth graders who had not passed it during the spring 2001 administration. The class of 2005 took the CAHSEE for the first time in iii, spring 2003.

In July 2003, the SBE took action to move the passage of the CAHSEE as a diploma requirement to the Class of 2006. The Class of 2006 took the CAHSEE for the first time as tenth graders in February 2004. In 2010, the SBE adopted the Common Core State Standards to be used as the basis for essay revisor curriculum, instruction, and assessment for iii California schools. Due to the change in academic standards, Senate Bill 172 (Liu) was signed by the Governor to essay questions suspend the administration of the CAHSEE and the requirement that students pass the CAHSEE to receive a high school diploma for the 201516, 201617, and 201718 school years. The law required that schools grant a diploma to any pupil who completed grade twelve in the 200304 school year or a subsequent school year and Richard, met all applicable graduation requirements other than the passage of the high school exit examination. The law further required the State Superintendent of Public Instruction to convene an profile questions, advisory panel to provide recommendations to the Superintendent on the continuation of the Richard, high school exit examination and on alternative pathways to satisfy the customer study, high school graduation requirements pursuant to Richard iii Education Code sections 51224.5 and 51225.3. The law became effective on January 1, 2016. EC Section 60855 required the California Department of Education (CDE) to contract for an independent evaluation of the CAHSEE beginning in profile questions, January 2000. Each evaluation report was required to include the following: (1) an analysis of student performance, broken down by grade level, gender, race or ethnicity, and portion of the exam, including any trends that became apparent over time, (2) an analysis of the exam's effects, if any, on college attendance, pupil retention, graduation, and dropout rates, including an iii, analysis of these effects on the subgroups described in (1) above, and (3) an analysis of Ethnography, whether the Richard, exam was likely to have, or had, differential effects, whether beneficial or detrimental, on the subgroups described in (1) above. The evaluation reports were required to include recommendations to customer improve the Richard, quality, fairness, validity, and reliability of the customer study, CAHSEE. The first report of the independent evaluation was completed and presented to the CDE, SBE, Legislature, Governor, and iii, other control agencies on tesl journal research, July 1, 2000.

Subsequent evaluation reports were due to these same parties by February 1 of every even-numbered year. These reports are posted on the Independent Evaluation Web page. Frequently asked questions, regulations, test blueprints, released test questions, study guides, and testing accommodations for Richard the CAHSEE. Tesl. E-mail updates sent out to the California Assessment of Student Performance and Progress System electronic mailing list. Summative Assessments. Richard Iii. The year-end assessment of grade level learning measuring progress toward college and career level readiness. California Assessment of Student Performance and Progress (CAASPP) e-mail update, September 20, 2017.

CAASPP Update, Issue 223 (added 15-Sep-2017) California Assessment of Student Performance and essay revisor, Progress (CAASPP) e-mail update, September 13, 2017. CAASPP Update, Issue 222 (added 08-Sep-2017) California Assessment of Student Performance and Progress (CAASPP) e-mail update, September 7, 2017. CAASPP Update, Issue 221 (added 31-Aug-2017) California Assessment of Richard, Student Performance and Progress (CAASPP) e-mail update, August 30, 2017. Matrix Four: ELPAC (added 28-Aug-2017) Matrix Four displays the universal tools, designated supports, and accommodations (non-embedded) allowed as part of the English Language Proficiency Assessments for California beginning October 1, 2017.

California Assessment of Student Performance and Progress (CAASPP) e-mail update, August 16, 2017. CAASPP Update, Issue 220 (added 28-Aug-2017) California Assessment of Student Performance and Progress (CAASPP) e-mail update, August 23, 2017. CAASPP Update, Issue 218 (added 10-Aug-2017) California Assessment of Student Performance and Progress (CAASPP) e-mail update, August 9, 2017.

How to Richard iii Write a Resume Skills Section. The resume skills section allows you to list, re-iterate, and expand upon your skills and abilities that are relevant to the job you are applying for. A well-crafted resume skills section will also help your resume beat Applicant Tracking System (ATS) “resume reading robots”, which is the first step to getting your application into a hiring manager’s hands. Don’t miss the study opportunity to make a powerful skills section that can tip the Richard odds in your favor — read on to learn how. Sometimes referenced as “ Additional Skills ” the Skills Section is Ethnography, where you can list all of Richard iii your useful abilities that are not overtly mentioned in the bullet points of the Work History sections. Here are some samples showing what they look like: Customer Service Resume Skills Section. Laborer Resume Skills Section. As you can see, these all tend to profile be brief and to the point.

Yet, there is a right way and iii, a wrong way to writing them. Don’t forget your cover letter. Tesl Journal Research. Browse through our library of Cover Letter Samples by Industry. Tips on Adding Additional Skills to Your Resume. In the above examples, there are a few similarities to the types of skills that the job seekers listed even though they are going after different positions. A hiring manager is iii, interested in what relevant skills you have. They do not care about whether or not you came in first place in the hot dog eating contest at the state fair. An IT Industry job seeker should not do this : Leader of a 70 member guild in Ethnography, World of Warcraft for 3 years.

Maintained a self-hosted VoIP chat server for 3 years. One of the above skills shows some legitimate tech savvy while the other does not. That’s something that might catch a hiring manager’s eye. Keep your skills targeted toward the Richard job you are applying for. Even if you have a knack for something that is not directly related to the position, as long as it’s relevant it’s worth mentioning . For example, if you are applying for an assistant manager position at essay revisor, a small music shop, it’s perfectly acceptable to mention that you can play guitar. It isn’t directly related to management, but it shows you have knowledge of the industry. Just like discussed in all of the Resume Genius resume samples, replace nonspecific adjectives with hard numbers. The same goes for how specific you are in regards to software, hardware, and other tools you are skilled with.

Don’t Say: Excellent with foreign languages. Do Say: Fluent in English and iii, Spanish , and proficient in French. Don’t Say: Skilled typist. Do Say: 70WPM typist. You don’t need to get overzealous with the specifics, but a couple of details go a long way.

When listing large software suites like Microsoft Office, try to name the individual applications you’re proficient with, such as PowerPoint or Excel when page space is adequate. If you’re only listing 2 or 3 bullet points, this isn’t that big of a deal, but once you start listing more, you want to keep things sensible. For example, keep your computer skills with your computer skills and your speaking and language skills with your speaking and language skills. Experienced graphic artist well versed with Adobe Photoshop and Adobe Illustrator Bilingual – Fluent in English and French Proficient with MS Word, Excel, and personal profile, PowerPoint Charismatic and confident public speaker. Experienced graphic artist well versed with Adobe Photoshop and Adobe Illustrator Proficient with MS Word, Excel, and iii, PowerPoint Charismatic and confident public speaker Bilingual – Fluent in English and French. Also, when possible list the essay revisor group of skills that are more important to the position that you’re applying for first.

You shouldn’t spend too much time debating on the ordering though as per the first tip, they all should be relevant anyway. Formatting: Additional Skills vs. Technical / Computer Skills. Most job seekers end up choosing a resume template that places their relevant skills closer to the bottom, but for some specific industries listing them at the top is very effective . Take a look at the sample resume for an applicant searching for an IT job: Because an IT job requires an employee to have a base set of skills, the applicant starts off by listing his Technical Skills instead of adding them as Additional Skills towards the end. He also breaks them down by theme, such as what computer networking skills he has and what operating systems he is proficient with, bolding each main general category and then listing each specific skill in its respective category. Some jobs where using a Technical Skills section instead of an Additional Skills section could be beneficial are: Information Technology Graphic Design Manufacturing Technical Writing Engineering.

Regardless of which style of Skills Section you use on your resume, as long as you use relevant, clear, well organized bullet points , you’re sure to impress. Industry-Specific Skills for your Resume. The Best List of Richard Skills For a Resume. Below are the most sought after skills and abilities that employers look for on a resume. If you can include these abilities on your resume, you will be sure to attract their attention. However, it is not enough to simply list your skills. The bottom line is that HR managers want proof. That’s why it is more effective to customer include examples of how you use your skills rather than merely stating, “Possess great communication skills.”

The bottom line is that HR managers want proof. Here is a list of good skills and Richard, example bullet points to good introduction essay add to your resume: Approach all work activities with deliberate focus to ensure that each task is completed correctly, efficiently, and effectively. Seek and actively learn new information to keep up to date with new skill requirements and Richard iii, technological innovations. Achieve high levels of multi-tasking ability by remaining focused and goal oriented, completing several tasks simultaneously to reach desired targets. Commended by peers for displaying a good attitude, working hard, and setting and achieving personal goals. Listen to and integrate criticism and gaming, advice from peers, teachers, and bosses, strengthening personal deficits and weaknesses wherever possible. Richard. Perform requested duties beyond the expected requirements to maintain high personal standards and ensure absolute satisfaction with produced work.

Adapt to all arising situations, and able to develop solutions to Ethnography problems as they appear to the satisfaction of any client. Work towards solutions with a flexible approach to all challenges that helps solve problems in the most direct and Richard iii, time efficient way possible. Respond and adapt to developing challenges and obstacles when under pressure calmly and logically to develop working solutions in a timely manner. Manage time constraints and galloway gaming essays algorithmic culture, unpredictable schedules with adaptable methodology that can re-prioritize and iii, delegate tasks to achieve maximum efficiency. Tesl Journal Paper. Develop and utilize a large personal knowledge base, creating a broad understanding of a wide range of issues and the ability to develop flexible solutions. Create working relationships with co-workers and iii, clients with varying personality types and coming from different backgrounds, maintaining a professional and egalitarian attitude at all times.

Adapted to new industry standards to guarantee that our business was compliant with all guidelines Revised my sales strategy to align with new customer trends. Evaluate and personal profile essay, dilute complex work processes into series of manageable tasks to increase efficiency and Richard iii, reduce waste. Tesl Research. Analyze large volumes of data and identify trends, and present results in a clear and understandable manner. Produce comprehensive solutions to complex problems through extensive analysis and accurate assessment of relevant data sets. Identify efficiency savings within given tasks and Richard, successfully implement them, aiding in efficient problem solving. Essay Revisor. Determine the relevance of suggested arguments and Richard iii, ideas, and analyze the relative importance of Ethnography each before accepting or rejecting them as courses of Richard iii action. Manage complex problems and tesl journal research, time-constrained tasks with rapid but error-free analyses to ensure projects are completed without disruption. Prevented workplace accidents by encouraging safe working practices and preserving company equipment. Responsible for resolving client issues, identifying customer trends, monitoring competitor activities.

Plan strategically and maintain awareness of attention to details to overcome challenges, meet deadlines and achieve objectives without sacrificing quality. Create and Richard, detail step-by-step processes to galloway algorithmic culture create intermediate and endpoint deadlines for all projects, making it easy to identify major obstacles and brainstorm solutions. Organize and Richard, communicate highly detailed planning and time management objectives to ensure all team members understand their roles and responsibilities. Identify errors and essay revisor, inconsistencies within any argument or reasoning used to form actionable conclusions, and present necessary counter-arguments. Restructure and reorganize underdeveloped projects that require complete revision to achieve detailed quality standards. Richard. Tasked by peers to oversee highly detailed projects, having a trusted ability to discover holes and issues where others may not. Foster strong relationships with customers and good introduction sentences, strategic partners to strengthen our brand awareness Facilitate monthly meetings with employees to ensure there is a mutual understanding of a project’s directives High levels of confidence when speaking either to groups or individuals that allows the Richard iii conveyance of ideas or instructions in a clear, easily understood manner.

The ability to disseminate detailed concepts into understandable ideas in both written and verbal communication. Understanding of the meaning and implementation of essays culture body language to both gauge other’s intent and views and project a desired stance to others through non-verbal communication. Highly developed communication skills both verbal and non-verbal that help build a relationship more conducive to an agreeable outcome of any negotiation. Outstanding Typing Skills (WPM: 90). Sound knowledge of troubleshooting techniques for Microsoft Office Suite High levels of iii analytical ability means that problems can be understood and overcome quickly and efficiently. Methodical approach to challenges means that problems can be overcome with solutions identified and implemented in the most efficient manner. Always seeking new information and keeping up to questions date with current requirements and iii, innovations within the field of study expertise. Exercise empathy with others to assist in all aspects of communication, creating higher chances of successful outcomes and compromises. Practice well-honed listening skills to give full attention to those in iii, need, accurately assess every individual’s situation, and build necessary rapport. Project calm and genuine interest in others through verbal and non-verbal means, building confidence with other parties to ensure successful conclusions to all interpersonal interactions.

Remain dispassionate and galloway gaming algorithmic culture, fair-minded during disagreements to highlight that ideas and opinions are always respected. Assist and teach others patiently when working towards a common goal, ensuring higher levels of iii cooperation when faced with challenges. Help and suggest to co-workers and peers to find institutions or people to seek help for problems that are affecting them professionally. Integrate into profile, all team situations easily and comfortably, possessing a personable nature that is iii, open to teamwork and tesl paper, cooperation. Negotiate team and Richard iii, co-worker conflict or pressure effectively and efficiently through strong interpersonal and communication skills. Tesl. Work towards the success of the group, de-emphasizing smaller perceived personal successes and focusing on the bigger picture. Listen actively and Richard, engage genuinely with others to ensure that all perspectives and ideas are equally respected.

Focus on customer study overcoming challenges rather than seeking to Richard blame the cause of any challenges and problems encountered, maintaining a positive attitude that is a benefit to galloway any team situation. Adhere to all institutional standards for ethical, interpersonal, and professional behavior at all times. Finish all tasks and projects on time with a reliably high level of quality. Accept all requests to Richard iii fill necessary shifts, schedules, or complete tasks when others are unavailable. Maintain a professional and egalitarian attitude at the workplace at all times, ensuring minimal interpersonal conflicts and acting as an ambassador for profile essay, the brand.

Trusted to handle sensitive items and situations, regarded as having a responsible and dependable personality by Richard, peers. Open a strong line of communication and make thorough preparations for taking time off. Assist others with tasks and projects during free time, even when it is unrelated or unrewarded. Seek answers to questions personally without needing excessive guidance, asking only when it is obvious the information cannot be found. Create personal tasks and personal essay questions, projects without supervision, while seeking advice and iii, permission to increase workplace efficiency. Learn new skills actively to tesl journal paper avoid over-reliance on co-workers and team members Operate independently of team members and management, submit comprehensive reports and feedback to keep projects on track. Argue against conventional wisdom when it is based on illogic or poorly conceived notions, even when it is unpopular to do so.

Utilize a wealth of skills, abilities, and personal networks to solve intractable problems and remove obstacles to completing projects. Display a thirst for knowledge, becoming an expert on any product or subject required quickly, and able to convey that knowledge clearly to Richard iii others. Customer Case Study. Assume responsibility for completing all important tasks at hand and filling in labor gaps wherever it is necessary. Brainstorm and develop approaches to problems in downtime and Richard iii, present them to peers without being personally tasked by management. Approach challenges as opportunities to improve skills and abilities, seeking advice and criticism to constantly improve. Essay Revisor. Volunteer for new projects and to complete tasks that are otherwise ignored or avoided. Speak frankly about weaknesses and issues that are causing problems and holdups, and offer well-developed solutions. Received award for outstanding work ethic 2 years in a row. Set challenging benchmarks of success and plan by which to iii achieve them each month. Suggest and promote ideas for analysis and judgement without ego or personal issues should they be rejected by others.

Assess and critically analyze personally developed ideas in the same way that others’ ideas are assessed. Compare, contrast, and tesl journal paper, combine creative ideas, using critical and creative thinking skills to develop insights and alternative possibilities. Project an innovative outlook that encourages free thinking to challenge conventional barriers in problem solving and generate interesting ideas. Apply rational analysis and promote an Richard evidence-based approach to take creative ideas and mold them into workable solutions. Appraise any given situation and galloway essays algorithmic, approach its unique problems with a consistent and iii, systematic methodology. Implemented efficiency and cost-saving initiatives that improved the tesl customer service process Evaluate the various risks and Richard, rewards related to Ethnography implementing new projects or programs. Maintain an “honesty is the best policy” philosophy in the workplace, while being tactful about giving constructive criticism. Richard Iii. Review project successes and failures dispassionately, accepting blame when mistakes are made and seek methods to good sentences prevent future issues. Conduct all business and iii, personal affairs according to tesl paper highest codes of Richard ethics and responsibility.

Establish trustworthy relationships with clients and co-workers, avoiding improper and unethical behavior. Follow institutional rules, processes, and practices at all times to support company’s quality management procedures. Report issues and problems through proper channels as set forth by tesl, company guidelines. Maintain a visionary outlook and the ability to see each challenge in the context of the broader scope of the project, while acting towards that desired end goal at all times. Project confidence and flexibility, able to accept differing views without viewing them as challenges to authority, and utilize good ideas from others. Utilize interpersonal skills to motivate and encourage co-workers, understanding that major goals are achieved through teamwork. Demonstrate critical thinking under stressful situations where problems are faced, and a willingness to make the right decisions even if they are unpopular. Display integrity and honesty at all times, honoring promises and defending values when challenged. Set an example for others, taking responsibility for successes and failures alike. Assumed a leadership role in the absence of the iii supervisor and ensured that the galloway essays culture office operated normally.

Assisted in the training of 3 new employees to iii quickly integrate them into the department’s workflow. Schedule meetings, appointments, and travel arrangements for managers. Compiled, prioritized, and processed all new purchasing orders Keep organized at all times, understanding that efficiency is customer study, achieved by being mindful of future and often unanticipated needs Accurately estimate the work involved in iii, any task to provide both a timetable and the effort required for successful completion. Excellent organizational skills to attribute time to customer case study carry out responsibilities personally and for each member of the project team. Highly developed communication skills for discussing a project at Richard, all levels, with the essay revisor ability to clearly articulate the work, issues and challenges as they arise in a manner other stakeholders will understand quickly. Overcome obstacles to iii project completion by being forward thinking and positive, rather than adhering to the accepted limits. Apply a logical mindset to bring well researched ideas to the table and, and able to dissect counter arguments methodically and Ethnography, without prejudice.

Project a positive persona that focuses on the positive outcome of any proposal or counter-proposal rather than the negative, ensuring all parties remain disposed to concessions. Listen actively to all arguments and ideas presented, and Richard, fairly weigh and analyze them before responding with counter-arguments and counter-proposals. Defend positions forcefully when necessary to achieve the best outcome possible for all stakeholders. Galloway Gaming Algorithmic. Seek out alternative solutions to stubborn problems, and methodically test, reject, and note progress and setbacks. Demonstrates the ability to analyze large volumes of data to find the required information within, efficiently and accurately. Shows comprehensive problem solving ability, producing creative solutions to complex problems. Can identify important concepts within a project to provide effective, targeted research. Can break down complex concepts and ideas into more manageable tasks for research purposes. Excellent communication skills that allow clear dissemination of iii researched data and ideas for further use. An analytical approach that ensures the identification and streamlining of good introduction sentences research opportunities with any given project for more efficient results. Maintain high levels of self-awareness that enables analysis of one’s own assumptions and values about any given subject.

Approach mistakes with a dispassionate demeanor, focusing on finding solutions rather than attributing blame. Project a “customer is always right” attitude at all times, even when clients are being rude and irrational. Iii. Keep a professional manner with peers, co-workers, and clients at all times, no matter the circumstances. Avoid emotional confrontation and tesl, arguments with peers and clients, seeking de-escalate issues and Richard, find ways to resolve issues rationally. Adhere to company work schedules and give notice before taking time off.

Remain calm under pressure, delivering workable problems during crisis scenarios in a timely manner. Perform and personal profile essay, oversee multiple individual tasks simultaneously during work projects, ensuring quality and efficiency while remaining within deadlines. Iii. Manage chaotic task loads and keep teammates focused and under control during high stress and time-sensitive crisis periods. Essays Algorithmic Culture. Approach complex and tangled problems with a dispassionate disposition that allows an efficient and analytical approach to any problem. Make and defend critical and high risk decisions based on iii careful research, analysis, and experience, accepting responsibility for the outcomes whatever they may be. Resolve interpersonal conflicts between other parties or personally by remaining objective and actively empathizing with the emotional parties. View every situation in the context of the broader picture to predict how the team may benefit overall from any given action. Utilize a diverse skillset to complement any team makeup, whether giving or receiving instruction.

Convey authority, competence, and a socially oriented attitude by keeping a strictly professional manner at all times. Build friendly relations and easily communicate with teammates, co-workers, and customers through a confident and outgoing demeanor. Seek out new relationships and form large networks of individuals, developing a pool of resources and talent that can be tapped to achieve goals and targets. Project warmth and sincerity to Ethnography peers and clients, and Richard, a willingness to work together to achieve mutual goals. Team worker who is galloway algorithmic culture, able to adapt in highly dynamic and changing situations. Collaborated in four-person team to Richard complete projects in a timely manner and essay revisor, under budget. Tech savvy, with the ability to Richard quickly learn and apply new software applications to profile questions the position. Desire to expand my current skillset and increase my value as an asset to the company. Broad knowledge base that aids in writing from a position of authority on a wide range of subjects.

Highly developed research skills aid in creating accurate, informative and in depth writing on any subject matter. Expert literary skills ensures error free writing, with perfect grammar and style at all times. Adaptable approach allows a writing style that fits with the subject at hand and its intended use. Empathic nature that allows the use of suitable language for iii, the intended audience so that the writing is always on the correct level for its intended readership. Focused and driven to sentences essay always meet deadlines and targets as required. As much as the Richard words on galloway gaming essays algorithmic a resume are important, so is the overall style and design. For more information on how to style your resume like a pro, check out the Resume Genius resume aesthetics guide. thanks for this! We’re glad you found it useful!

Good luck on the job hunt. These are very important and Richard, helpful information! Thank you so much! #128578; Happy to help! Let us know how your job hunt goes. This is a wonderful site and essay, very helpful!! Thank you.

Thanks for the kind words! Feel free to spread the Richard iii word. Share How to Write a Resume Skills Section Our code geeks and tesl research, HR experts are proud to introduce our new Free Resume Builder software to iii help you land more interviews in today’s competitive job market. We provide HR-approved resume templates, built-in job description bullet point phrases to choose from, and easy export to MS Word and PDF. Get awesome job opportunities sent directly to your inbox. By clicking Send Me Job Alerts, I agree to the Resume Genius Terms of Use and Privacy Policy. Play the personal profile essay One-Minute Game That’ll Show You How to Improve Your Resume. Think you can judge the quality of a resume within 6 seconds? The answer may surprise you.

Put your skills to the test, and learn how to make your resume 6 second worthy! 3 Reasons Why I Wouldn't Hire Tom Brady. Tom Brady’s resume is iii, a couple yards short of a touchdown. There are tons of errors throughout. See why.

How to essay revisor Modify and Maximize your Resume Template. Need a resume template? Feel free to download one, but be sure to make small modifications to unlock your. Would You Rather Work for a Man or a Woman? Do people still care whether they work for a man or woman, or do most people simply look for a nice job. Resume Builder Comparison | Resume Genius vs. LinkedIn Labs. What are the differences between the Richard major online resume builders?

Here's an in depth analysis of what. Resume Genius' builder, resources, advice and career tips are regularly featured on some of the personal profile essay world's leading online and offline publications including: Our code geeks and HR experts are proud to Richard introduce our new Free Resume Builder software to help you land more interviews in today's competitive job market. HR-proven resume templates, built-in job description bullet point phrases to choose from, and easily export to MS Word and PDF.

2 on a tout essaye 0 , 1 , flatismiridi 6 . Richard! . Essay Revisor! On a tout essaye #8212; YouTubeFlorence Foresti / On a tout Catherine Barma Play all. 4:12. Richard! Play next; Play now; Florence Foresti #8212; Catherine Barma : L#039;audimat #8212; On a tout essay On a tout essaye — WikipediaOn a tout essaye est une emission de television francaise diffusee sur France 2 du 19 septembre 2000 au 29 juin 2007 presentee par Laurent Ruquier, produite On a tout essaye (TV Series 2000– ) #8212; IMDbWith Laurent Ruquier, Gerard Miller, Christine Bravo, Steevy Boulay. Personal Profile! On a tout essaye (TV Series 2000– ) #8212; Episodes #8212; IMDbOn a tout essaye, meme le prime 3. Iii! Know what this is about? Be the Ethnography, first one to Richard iii, add a plot. Tesl! Add Image.

Unknown. Richard Iii! On a tout essay On A Tout Essaye #8212; jjbest.co.ukDownload and Ethnography Read On A Tout Essaye On A Tout Essaye That#039;s it, a book to iii, wait for good essay in this month. Even you have wanted for Richard long time for introduction sentences releasing this book on Richard a tout On A Tout Essaye #8212; pslife.co.ukDownload and research paper Read On A Tout Essaye On A Tout Essaye It sounds good when knowing the on a tout essaye in Richard this website. This is study, one of the Richard, books that many people On a tout essaye #8212; LaBandeARuquier.comVoila tous les membres de l’equipe technique de l’emission TV de la bande a Ruquier, On a tout essaye du moins, ceux que l’on a trouve (reprise du Florence Foresti #8212; Best Of on tesl paper a tout essaye (Bonus DVD Florence Foresti #8212; Best Of on Richard iii a tout essaye (Bonus DVD) Partie 2 : http://www.dailymotion.com/Express72/video/x44r9n_florence-foresti-best-of-on-a- tout _fun On A Tout Essaye #8212; cprvdl.co.ukDownload and customer case study Read On A Tout Essaye On A Tout Essaye Bring home now the book enPDFd on iii a tout essaye to be your sources when going to read. It can be your newTouche pas a mon poste vs On a tout essaye | SCREENSHOOTERSLes emissions chroniques Touche pas a mon poste ! et On a tout essaye, deux emissions de televisions au nom assez long mais pas que Les similitudes entre ces. Case! Florence Foresti #8212; Best Of on iii a tout essaye (Bonus DVD.

Florence Foresti #8212; Best Of on Ethnography a tout essaye (Bonus DVD) Partie 2 : http://www.dailymotion.com/Express72/video/x44r9n_florence-foresti-best-of- on-a-tout _fun On A Tout Essaye #8212; pslife.co.ukDownload and Richard iii Read On A Tout Essaye On A Tout Essaye It sounds good when knowing the on Ethnography a tout essaye in iii this website. This is one of the books that many people On A Tout Essaye #8212; cprvdl.co.ukDownload and sentences Read On A Tout Essaye On A Tout Essaye Bring home now the Richard, book enPDFd on essay revisor a tout essaye to Richard iii, be your sources when going to read. It can be your new On A Tout Essaye #8212; jtaltd.co.ukDownload and Read On A Tout Essaye On A Tout Essaye Find loads of Ethnography, the on Richard a tout essaye book catalogues in this site as the essay revisor, choice of Richard iii, you visiting this page.Interview On a tout essaye, Laurent Ruquier (France 2 Interview On a tout essaye, Laurent Ruquier (France 2 ) pour la sortie du livre Des Souris un Homme On a tout essaye #8212; Forum #8212; koreus.com On a tout essaye est le rendez-vous quotidien d#039;un ramassis de connards arrivistes assoiffes de pouvoir qui se prennent pour des intellectuels.Contre le chomage, on good introduction sentences essay a tout essaye, sauf ce qui marcheOn n’ose rappeler la phrase deplorable de Francois Mitterrand, en 1993 : « Dans la lutte contre le chomage, on a tout essaye. » Las, Francois On a tout essaye (ou presque)Tous les photomontages humoristiques et satiriques de Tropicalboy diffuses dans l#039;emission de Laurent Ruquier et presentes par l#039;irresistible Christophe GenTV.be :: France 2 : Generique On a tout essaye (2004)2004 France 2 Generique On a tout essaye. Richard Iii! Duree : 43 secondes Ajoutee le 12/09/2006 a 08:37 Cette video a ete visionnee 8670 foisChomage : « On a tout essaye » | ContrepointsOn se souvient de la formule de Francois Mitterrand : « Contre le chomage, on a tout essaye »… Sauf la liberte On a tout essaye #8212; Tele-Loisirs #8212; programme-tv.net On a tout essaye : Entoure de chroniqueurs qui refusent la langue de bois, Laurent Ruquier passe au crible les biens culturels, livres, films, disques, On a tout essaye #8212; m2mjomtravel.com. DARK_THEME_TEXT_LINE_2]]. Tout sur les Abdominaux et ainsi me permettre de partager vos reflexions avec d#039;autres personnes du monde entier Comment mincir on case a tout On A Tout Essaye #8212; irjobs.co.ukDownload Now and Read On A Tout Essaye On A Tout Essaye Inevitably, reading is Richard iii, one of the customer study, requirements to be undergone. Richard Iii! To improve the performance and quality, someone On a tout essaye #8212; WikimondeL’emission est egalement diffusee le samedi durant la saison 2005-2006 sous le nom On a tout essaye meme de-2007-qui-a-tue- on-a-tout-essaye -039 Contre le chomage, on case study a tout essaye ? #8212; EconomieMatinD#039;ailleurs n#039;est ce pas le meme Francois Mitterrand qui declara en 1993 : « Dans la lutte contre le chomage, on a tout essaye On a tout essaye #8212; Home | Facebook On a tout essaye. 436 likes · 1 talking about this. La mythique emission qu#039;anima Laurent Ruquier de 2000 a 2007 sur France 2, la 1ere annee le mardi On a tout essaye — Wikipedia On a tout essaye est une emission de television francaise diffusee sur France 2 du 19 septembre 2000 au 29 juin 2007 presentee par Laurent Ruquier, produite On A Tout Essaye #8212; symoco.co.ukDownload On A Tout Essaye On A Tout Essaye New updated!

The latest book from a very famous author finally comes out. Richard Iii! Book of on a tout essaye , as anLaBandeARuquier.com • Voir le forum #8212; On a tout essayeSujets Reponses Vus Dernier message; Un forum On a tout essaye, c#039;est nouveau ! de Remy » Sam 16 Aou 2008 15:00 13 Reponses 8064 Vus Dernier message de youyou46 On a tout essaye : homework website #8212; customwriting.linkJumps the Ethnography, details, nuances, and issues of Richard, teenagers would be a pleasent feeling. Profile Essay Questions! when i on a tout essayer your essay sodium benzoate food preservative essays on Richard iii their. Galloway! . Richard Iii! ! , . Personal Profile! !

Cisco IOS Terminal Services Command Reference, Release 12.2. Cisco IOS Terminal Services Command Reference, Release 12.2. Commands LI through SH. View with Adobe Reader on a variety of devices. To identify a specific line for Richard, configuration and case, enter line configuration collection mode, use the Richard line command in global configuration mode. (Optional) Auxiliary EIA/TIA-232 DTE port. Must be addressed as relative line 0. The auxiliary port can be used for modem support and asynchronous connections. (Optional) Console terminal line. The console port is DCE.

(Optional) Standard asynchronous line. (Optional) Virtual terminal line for remote console access. Relative number of the terminal line (or the first line in a contiguous group) that you want to essay revisor configure when the iii line type is specified. Numbering begins with zero. (Optional) Relative number of the last line in Ethnography, a contiguous group that you want to Richard configure. If you omit any keyword, then line-number and personal profile questions, ending-line-number are absolute rather than relative line numbers.

There is no default line. This command was introduced. You can address a single line or a consecutive range of lines with the line command. A line number is necessary, though, and you will receive an error message if you forget to include it. Entering the line command with the optional line type ( aux , console , tty , or vty ) designates the line number as a relative line number. Richard! For example, to essay revisor configure line parameters for iii, line 7 (a TTY line), you could enter the journal following: You also can use the line command without specifying a line type. In this case, the line number is treated as an iii absolute line number.

For example, to configure line parameters for line 5, which can be of journal research any type, you could enter the following: Absolute line numbers increment consecutively and can be difficult to manage on large systems. Relative line numbers are a shorthand notation used in configuration. Iii! Internally, the tesl paper Cisco IOS software uses absolute line numbers. You cannot use relative line numbers everywhere, but you can use absolute line numbers everywhere. The absolute line number of the auxiliary port is 1. Richard! The relative line number of the profile questions auxiliary port is iii 0. See the modem line configuration command to Ethnography set up modem support on the auxiliary port. The software keeps a table of absolute and relative line numbers that you can display with the show users all EXEC command. A sample display follows: The absolute line numbers are listed at the far left, followed by the line type, and Richard, then the relative line number. Relative line numbers always begin numbering at zero and study, define the type of line. Richard Iii! Addressing the second virtual terminal line as line VTY 1, for example, is easier than remembering it as line 143—its absolute line number.

The line types are ranked as follows in the line table: 2. Standard asynchronous line (TTY) 3. Customer Study! Auxiliary port (aux) 4. Iii! Virtual terminal line (VTY) The terminal from which you locally configure the router is personal profile questions attached to the console port.

To configure line parameters for the console port, enter the Richard following: The console relative line number must be 0. Virtual terminal lines are used to allow remote access to good sentences the router. Iii! A virtual terminal line is not associated with either the tesl paper auxiliary or console port. The router has five virtual terminal lines by default. Richard! However, you can create additional virtual terminal lines as described in the chapter Configuring Protocol Translation and Virtual Asynchronous Devices in the Cisco IOS Terminal Services Configuration Guide . Configuring the console port or virtual terminal lines allows you to perform such tasks as setting communication parameters, specifying autobaud connections, and configuring terminal operating parameters for the terminal you are using. The following example starts configuration for virtual terminal lines 0 to essay revisor 4:

In the following example, the user creates and configures the maximum 100 virtual terminal lines with the no login command: In the Richard iii following example, the user eliminates virtual terminal line number 5 and all higher-numbered virtual terminal lines. Only virtual terminal lines 0 to 4 will remain. In the following example, the user configures console line 0, auxiliary line 0, and virtual terminal lines 0 to 4: Displays the parameters of a terminal line. Displays information about the gaming culture active lines on the router. To change a login username, use the login command in EXEC mode. This command has no arguments or keywords.

This command was introduced. You can change a login username if you must match outgoing access list requirements or other login prompt requirements. When you enter this command, the Cisco IOS software prompts you for a username and iii, password. Enter the new username and the original password. If the essay revisor username does not match, but the password does, the Cisco IOS software updates the session to Richard the new username with which the login command attempt was made. If no username and password prompts appear when you enter this command, the network administrator did not specify that a username and password be required at login time. If both the username and password are entered correctly, the session becomes associated with the specified username. When you access a system using TACACS security with this command, enter your login name and specify a TACACS server using the user @ tacacs-server syntax when the Username: prompt appears.

The TACACS server must be one of those defined in a Cisco IOS software configuration file. For more information, refer to the sections about essay revisor specifying a TACACS host in the Cisco IOS Security Configuration Guide, Release 12.2, or refer to iii the tacacs-server host command in Ethnography, the Cisco IOS Security Command Reference, Release 12.2 . If you do not specify a host, the iii Cisco IOS software tries each of the TACACS servers in the list until it receives a response. If you do specify a host that does not respond, no other TACACS server is queried. The Cisco IOS software will deny access or function according to the action specified by the tacacs-server last-resort command, if one is configured. If you specified a TACACS server host with the user @ tacacs-server command, the TACACS server specified will be used for all subsequent authentication or notification queries, with the possible exception of essay revisor Serial Line Internet Protocol (SLIP) address queries.

The following example shows how login usernames and passwords can be changed. In this example, a user currently logged in Richard iii, under the tesl journal username user1 attempts to change that login name to user2. After entering the login command, the user enters the iii new username, but enters an incorrect password. Ethnography! Because the password does not match the original password, the iii system rejects the galloway gaming essays culture attempt to change the username. Next, the user attempts the login change again, with the username user2, but enters the correct (original) password.

This time the password matches the current login information, the login username is iii changed to user2, and the user is allowed access to Ethnography the EXEC at the user level. Sets up a temporary password on a line. Enables the lock EXEC command. Note This command cannot be used with AAA/TACACS+. Richard Iii! Cisco recommends that you use the login authentication command instead of the galloway gaming essays login line configuration command. Refer to the Cisco IOS Security Command Reference for a description of the login authentication command.

To enable password checking at login, use the login command in iii, line configuration mode. To disable password checking and allow connections without a password, use the no form of this command. (Optional) Selects local password checking. Authentication is based on the username specified with the username global configuration command. (Optional) Selects the TACACS-style user ID and password-checking mechanism. Virtual terminals require a password. If you do not set a password for customer case, a virtual terminal, it responds to Richard attempted connections by displaying an error message and closing the connection.

This command was introduced. If you specify the login command without the local or tacacs option, authentication is based on the password specified with the password line configuration command. The following example sets the password letmein on vty 4: The following example enables the TACACS-style user ID and password-checking mechanism: Sets a local password to control access to various privilege levels. peer default ip address. Specifies an IP address, an address from tesl journal research a specific IP address pool, or an address from the DHCP mechanism to be returned to a remote peer connecting to this interface. Enables virtual profiles by AAA configuration. To define a string of characters that is sent to Richard iii a host after a successful Telnet connection, use the profile essay login-string command in global configuration mode. To remove the login string, use the no form of iii this command.

Specifies the galloway essays algorithmic culture name of the host. Sets a delimiting character of your choice—a pound sign (#), for example. You cannot use the delimiting character in the busy message. Specifies the login string. (Optional) Sets a pause in seconds. To insert pauses into the login string, embed a percent sign (%) followed by the number of seconds to Richard iii pause and the letter p. (Optional) Prevents users from issuing commands or keystrokes during a pause. (Optional) Sends a Break character. (Optional) Supports TN3270 terminals. Sends only essay revisor, CR and no LINE FEED. No login strings are defined. This command was introduced.

Follow this command with one or more blank spaces and a delimiting character of your choice. Then enter one or more lines of text, terminating the message with the second occurrence of the delimiting character. To use a percent sign in the login string, precede it with another percent sign; that is, type the Richard iii characters %%. The options can be used anywhere within the essay revisor message string. This command applies only to rlogin and Telnet sessions. In the Richard following example, the value % 5p causes a 5-second pause: To log in to essay revisor a packet assembler/disassembler (PAD), use the pad command in EXEC mode. Specifies the X.121 address of the X.25 host. Specifies the iii X.25 host name if the host-to-address mapping has been set with the X.25 host command.

(Optional) Includes the specified text in the Call User Data (CUD) field of the outgoing Call Request Packet. (Optional) Displays the informational level of logging messages whenever the remote host changes an X.3 parameter setting or sends any other X.29 control packet. (Optional) Sets X.3 PAD parameters for the name script. Using this keyword and profile name argument is the same as issuing the profile essay questions x29 profile global configuration command when translating X.25. If the X.29 profile is Richard set to default , the essay revisor profile is applied to all incoming X.25 PAD calls, including the calls used for protocol translation. (Optional) Suppresses information messages. Replace the message argument with the actual message that you want to suppress. (Optional) Causes reverse-charge calls to be accepted on a per-call (rather than a per-interface) basis.

(Optional) Applies x25 map pad command entry options (such as CUD and idle) and facilities (such as packet in, packet out, win in, and win out) to the outgoing PAD call. This function occurs only if a matching X.121 destination address exists in an x25 map pad command entry. This command was introduced. The pad command supports one-word connections. You need not enter the Richard pad command; entering the essay address is Richard iii enough to start the connection. A PAD can also be accessed and X.3 parameters configured with the x28 EXEC command, which uses the gaming essays algorithmic culture standard X.28 user interface. You can have several PAD connections open at the same time and switch between them. Iii! You also can exit a connection and return to the user EXEC prompt at any point. To open a new connection, first exit the current connection by customer case study entering the escape sequence ( Ctrl-Shift-6 then x [ Ctrl^x ] by default) to return to the EXEC prompt, then open the new connection. If the /use-map option is selected on iii, the outgoing pad command, the x25 map pad command entries are searched for a matching X.121 destination address.

If a match is found, the x25 map pad command entry options (such as CUD and idle) and facilities (such as packet in, packet out, win in, and win out) are applied to introduction essay the outgoing PAD call. To display information about packet transmission and X.3 PAD parameter settings, use the show x25 pad command. To exit a session, simply log out Richard iii, of the Ethnography remote system. Then, terminate the active session by entering the exit command. Use the ? command to display pad command options, as shown in the following example: The following example starts a PAD session: You can also access a PAD using standard X.28 commands. The following example enters X.28 mode with the x28 EXEC command and configures a PAD with the set X.3 parameter command.

The set command sets the idle time delay to 40 seconds. The following example uses the /use-map option to configure a larger window and packet size than the default specified on the interface, and it sets the virtual circuit idle time to 2 seconds. Notice that the iii map values are used rather than the interface default values. Automatically translates the request to another outgoing protocol connection type when an X.25 connection request to tesl journal paper a particular destination address is received. To set X.3 parameters, use the resume command in EXEC mode. (Optional) The name or number of the Richard iii connection; the default is the most recent connection. (Optional) Sets the X.3 connection options and packet assember/disassembler (PAD) parameters for the Cisco IOS software. Profile Essay! See Table 9 in the Usage Guidelines for the PAD parameter numbers. Refer to the chapter Configuring the Cisco PAD Facility for X.25 Connections of the Cisco IOS Terminal Services Configuration Guide, Release 12.2 , for a list of these connection options. For outgoing connections, the Richard iii X.3 parameters default to the following:

All other parameters default to tesl research zero, but can be changed using the iii /set switch option with either the resume command or the x3 command. For incoming PAD connections, the software sends an good essay X.29 SET PARAMETER packet to set only the following parameters: This command was introduced. Table 9 summarizes the X.3 PAD Parameters supported on Cisco devices. Reefer to the X.3 PAD Parameters appendix in the Cisco IOS Terminal Services Configuration Guide, Release 12.2 for more complete information about Richard these parameters. See Table 36 in this publication for a list of ASCII characters. Table 9 Supported X.3 PAD Parameters. PAD recall using a character. Minimum value: 0; maximum value: 126; X.28 PAD user emulation mode default: 1.

Note Not supported by PAD EXEC user interface. Minimum value: 0; maximum value: 1; PAD EXEC mode and X.28 PAD user emulation mode default: 1. Selection of data forwarding character. Minimum value: 0; maximum value: 255; PAD EXEC mode default: 2 (CR); X.28 PAD user emulation mode default: 126 ( Selection of tesl journal idle timer delay. Minimum value: 0; maximum value: 255; PAD EXEC mode default: 1; X.28 PAD user emulation mode default: 0. Ancillary device control. Minimum value: 0; maximum value: 2; PAD EXEC mode default: 0; X.28 PAD user emulation mode default: 1.

Control of PAD service signals. Minimum value: 0; maximum value: 255; PAD EXEC mode default: 0; X.28 PAD user emulation mode default: 2. Note Not supported by Richard PAD EXEC user interface. Action upon receipt of a BREAK signal. Minimum value: 0; maximum value: 31; PAD EXEC mode default: 4; X.28 PAD user emulation mode default: 2.

Minimum value: 0; maximum value: 1; PAD EXEC mode and X.28 PAD user emulation mode default: 0. Padding after Return. Minimum value: 0; maximum value: 255; PAD EXEC mode and X.28 PAD user emulation mode default: 0. DTE speed (binary speed of tesl start-stop mode DTE) Minimum value: 0; maximum value: 18; PAD EXEC mode and X.28 PAD user emulation mode default: 14. Flow control of the PAD by the start-stop DTE. Minimum value: 0; maximum value: 1; PAD EXEC mode default: 0; X.28 PAD user emulation mode default: 1.

Line feed insertion (after a Return) Minimum value: 0; maximum value: 7; PAD EXEC mode and X.28 PAD user emulation mode default: 0. Line feed padding. Minimum value: 0; maximum value: 255; PAD EXEC mode and Richard, X.28 PAD user emulation mode default: 0. Minimum value: 0; maximum value: 1; PAD EXEC mode and essay revisor, X.28 PAD user emulation mode default: 0. Minimum value: 0; maximum value: 127; PAD EXEC mode and X.28 PAD user emulation mode default: 127 (DEL). Minimum value: 0; maximum value: 127; PAD EXEC mode default: 21 (NAK or Ctrl-U); X.28 PAD user emulation mode default: 24 (CAN or Ctrl-X). Minimum value: 0; maximum value: 127; PAD EXEC mode and Richard, X.28 PAD user emulation mode default: 18 (DC2 or Ctrl-R). Editing PAD service signals. Minimum value: 0; maximum value: 126; PAD EXEC mode default: 0; X.28 PAD user emulation mode default: 2. Note Not supported by PAD EXEC user interface.

Minimum value: 0; maximum value: 255; PAD EXEC mode and X.28 PAD user emulation mode default: 0. Note Not supported by PAD EXEC user interface. Minimum value: 0; maximum value: 4; PAD EXEC mode and X.28 PAD user emulation mode default: 0. Note For additional values that can be selected for parameter 21, including parity treatment to conform to the French Transpac public switched data network and its technical specification and utilization of networks standards (STUR), see Appendix A, X.3 PAD Parameters, in the Cisco IOS Terminal Services Configuration Guide, Release 12.2. The /set switch sets the X.3 parameters defined by parameter number and value, separated by Ethnography a colon. You set one or more X.3 PAD parameters, as follows:

Step 1 Escape out of the iii current session by good essay pressing the escape sequence ( Ctrl-Shift-6 then x [ Ctrl^x ] by default) and Richard, return to journal research the EXEC prompt. Step 2 Issue the where command, to Richard iii list the open sessions. Case! All open sessions associated with the current terminal line are displayed. Step 3 Enter the resume command, followed by the parameter, a colon, and iii, then the essay revisor value to be set. The following example specifies that local echo mode be turned on for a connection to Richard the device named Swift (which is session number 3). As shown in Table 7, local echo on uses the parameter 2 and the value 1 (represented as 2:1 in this example): To switch to another open Telnet, rlogin, local-area transport (LAT), or packet assembler/disassembler (PAD) session, use the gaming algorithmic resume command in EXEC mode. (Optional) The name or number of the connection; the default is the most recent connection. (Optional) One of the options listed in Table 8. (Optional) Sets PAD parameters for Richard iii, the Cisco IOS software (see Table 7).

This command was introduced. Table 10 lists Telnet and rlogin resume options. Table 10 Telnet and rlogin resume Options. Displays parameter changes and messages. In the Cisco IOS software, this option displays informational messages whenever the remote host changes an X.3 parameter, or sends an X.29 control packet.

Performs local echo. Enables line-mode editing. Cancels printing of parameter changes and messages. Disables local echo. Disables line mode and enables character-at-a-time mode, which is the default. Disables stream processing. Sets X.3 connection options. Refer to the chapter Configuring the personal profile essay Cisco PAD Facility for Richard iii, X.25 Connections of the introduction sentences essay Cisco IOS Terminal Services Configuration Guide, Release 12.2 , f or a list of these connection options. Enables stream processing.

1 /noline is the default keyword. You can have several concurrent sessions open and switch between them. The number of sessions that can be open is defined by the session-limit command . You can switch between sessions by escaping one session and resuming a previously opened session, as follows: Step 1 Escape out of the current session by pressing the escape sequence ( Ctrl-Shift-6 then x [ Ctrl^x ] by iii default) and return to the EXEC prompt. Step 2 Enter the Ethnography where command, to Richard list the open sessions. All open sessions associated with the current terminal line are displayed. Step 3 Enter the resume command and the session number to make the connection. You also can resume the previous session by good pressing the Return key. The Ctrl^x , where , and resume commands are available with all supported connection protocols. The following example shows how to escape out of a connection and to resume connection 2:

You can omit the command name and simply enter the Richard iii connection number to resume that connection. The following example illustrates how to resume connection 3: show tn3270 ascii-hexval. Displays ASCII-hexadecimal character mappings. Lists open sessions associated with the current terminal line. To log in to essay revisor a UNIX host using rlogin, use the Richard rlogin command in EXEC mode. Specifies the host name or IP address.

(Optional) The Berkeley Standard Distribution (BSD) UNIX syntax that specifies a username for the remote login. If you do not use this option, the remote username is your local username. (Optional) The EXEC command syntax that specifies a remote username in the initial exchange with the remote host. The rlogin protocol will not present you with the login prompt. (Optional) Prevents onscreen display of all messages from the Cisco IOS software. (Optional) Enables debugging output from the rlogin protocol. This command was introduced. The /quiet keyword was added. You can have several concurrent rlogin connections open and switch between them. To open a new connection, first suspend the current connection by pressing the escape sequence ( Ctrl-Shift-6 then x [Ctrl^x ] by default) to Ethnography return to the EXEC prompt. Then open a new connection.

A user cannot automatically log in to a UNIX system from the Richard iii router, but must provide a user ID and a password for each connection. If your preferred transport is set to gaming essays algorithmic rlogin , you can use the connect command in place of the iii rlogin command. Galloway Algorithmic Culture! Refer to the chapter Configuring Terminal Operating Characteristics for Dial-In Sessions in Richard iii, the Cisco IOS Terminal Services Configuration Guide, Release 12.2, for more information about galloway essays culture configuring a preferred transport type. When your preferred transport is set to none or to another protocol, you must use the Richard rlogin command to connect to a host. To terminate an active rlogin session, enter one of the following commands at the UNIX prompt of the essay revisor device to Richard iii which you are connecting:

The following example illustrates how a user with the profile questions login name jsmith can use the rlogin ? help command and the debug command mode to establish and troubleshoot a remote connection to the host named Alviso: The following example illustrates debug return on the host named zipper by the user named staff: The following example makes an Richard rlogin connection to a host at address 10.30.21.2 for a user named supervisor and Ethnography, enables the message mode for debugging: The following example makes an rlogin connection to a host named headquarters for the user named admin: The following example suppresses all onscreen messages from the Cisco IOS software during login and logout: Logs in to a host that supports Telnet, rlogin, or LAT. Logs in to a host that supports Telnet.

To choose an authentication method for determining the local username to send to the remote rlogin server, use the rlogin trusted-localuser-source command in Richard, global configuration mode. To restore the default rlogin behavior, use the no form of essays algorithmic culture this command. rlogin trusted-localuser-source [ local | radius | tacacs ] no rlogin trusted-localuser-source [ local | radius | tacacs ] (Optional) Uses local username from Richard iii any authentication method. (Optional) Uses local username from RADIUS authentication. (Optional) Uses local username from TACACS authentication. The user must enter a rlogin username and password when connecting to the rlogin server. This command was introduced.

Use this command to gaming essays define which of the sources for iii, local usernames are valid. The rlogin protocol passes three types of information: the remote username, the local username, and galloway algorithmic culture, the local host name of the Richard iii router. The rlogin trusted-localuser-source command allows you to configure one of three behaviors for galloway culture, making connections to the rlogin server, as follows: • The user must enter a login username and password to connect (default). • The Cisco IOS-authenticated username can be passed to the rlogin server so the Richard user need only enter a password to connect. • The user can be automatically connected to the rlogin server without needing to provide a username or password. This configuration is made by using both the customer rlogin trusted-localuser-source and rlogin trusted-remoteuser-source local commands where both the iii Cisco IOS authenticated username and the rlogin server username are the same.

The following example uses the local username from RADIUS authentication: Assigns an galloway essays IP address to the service provided on a TCP port. Logs in to a UNIX host using rlogin. rlogin trusted-remoteuser-source local. Determines the remote username to Richard send to customer case study the remote rlogin server.

Temporarily defines the list of services to which you or another user can connect. rlogin trusted-remoteuser-source local. To determine the remote username to send to the remote rlogin server, use the rlogin trusted-remoteuser-source local command in global configuration mode. To restore the default rlogin behavior, which is to iii prompt the user for the remote username, use the no form of sentences this command. rlogin trusted-remoteuser-source local. no rlogin trusted-remoteuser-source local. This command has no arguments or keywords. The user must enter an rlogin username and password when connecting to the rlogin server. This command was introduced.

The current username is used only Richard, if the rlogin host /user username command is not enabled. If the current username is tesl journal research paper not known, rlogin falls back to providing the login: prompt to iii discover a remote username. After you issue the Ethnography rlogin trusted-remoteuser-source local command, you will not be prompted for a username. The first response you see is the password prompt from the remote system. For example, when this command is not enabled, you must enter your username twice (once at Richard iii, initial system login and essays algorithmic culture, once for Richard, the rlogin command). Caution Configuring the remote host to consider the Cisco router a trusted host should be considered a security hole. The following sample output shows the two prompts a user must reply to profile questions when the rlogin trusted-remoteuser-source local command is not set: The following example shows that after you issue the Richard rlogin trusted-remoteuser-source local command, you no longer need to specify the username after the rlogin command. Essay Revisor! The username is iii automatically copied from the user ID of the router: The following example uses the case study /user root keyword option as an override:

Assigns an Richard iii IP address to the service provided on a TCP port. Logs in to a UNIX host using rlogin. Chooses an authentication method for determining the local username to send to the remote rlogin server. Temporarily defines the list of services to which you or another user can connect. To set the terminal receive speed (how fast the terminal receives information from the modem), use the rxspeed command in line configuration mode. To reset the default value, use the no form of this command. Baud rate in journal research, bits per second (bps). This command was introduced.

Set the speed to match the baud rate of whatever device you have connected to the port. Some baud rates available on devices connected to Richard the port might not be supported on tesl paper, the system. The system will indicate if the speed you select is not supported. Note If the line was previously configured for Richard, automatic baud rate detection (autobaud), disable autobaud by entering the essay questions no autobaud command before entering the rxspeed command to fix the speed of the Richard iii port. The following example sets the line 5 receive rate to 2400 bps:

Sets the flow control start character. Sets the gaming essays culture terminal receive speed (how fast information is sent to the terminal) for Richard iii, the current line and session. Sets the terminal transmit speed (how fast the terminal sends information to the modem). To enable call back to clients who request a callback from the EXEC level, use the service exec-callback command in galloway essays culture, global configuration mode. This command has no arguments or keywords. Callback is not enabled. This command was introduced. This command enables the iii Cisco IOS software to return a call to a device that dials in, connects to the EXEC, and requests callback.

The following example enables EXEC level callback: Enables an ARA client to request a callback from an ARA client. Displays callback events when the router is using a modem and a chat script to call back on a terminal line. Displays information associated with the discovery and Ethnography, configuration of the modem attached to Richard iii the router. ppp callback (PPP client) Enables a dialer interface that is not a DTR interface to good introduction sentences function either as a callback client that requests callback or as a callback server that accepts callback requests. Specifies that a chat script start on a line when an ARA client requests a callback. Establishes a username-based authentication system, such as PPP CHAP and Richard iii, PAP. To provide backward compatibility for essay questions, client software scripts expecting Serial Line Internet Protocol (SLIP) and PPP dialogs to be formatted with Cisco IOS software Release 9.1 or earlier releases, use the service old-slip-prompt s command in global configuration mode. To disable this function, use the Richard no form of this command.

no service old-slip-prompts. This command has no arguments or keywords. The prompts and information sent by SLIP and PPP are formatted with the current release of Cisco IOS software. This command was introduced. This command provides backward compatibility for journal paper, client software scripts expecting SLIP and PPP dialogs to be formatted with Cisco IOS software Release 9.1 or earlier releases. The following example shows the output of a SLIP command after the Richard service old-slip-prompts command is enabled: To log the X.121 calling address, Call User Data (CUD), and IP address assigned to essay revisor a vty asynchronous connection, use the service pt-vty-logging command in global configuration mode. To disable this function, use the iii no form of this command. no service pt-vty-logging. This command has no arguments or keywords. This feature is disabled.

This command was introduced. This command permits you to log the X.121 calling address, CUD, and IP address assigned to a vty asynchronous connection and research, direct this information to the console, an internal buffer, or a UNIX syslog server, depending on the logging configuration command you use. This authentication information can be used to associate an incoming packet assembler/disassembler (PAD) vty-asynchronous connection with an IP address. Note By default, the Cisco IOS software displays all messages to the console terminal. The following example enables you to Richard iii log the X.121 calling address, CUD, and IP address assigned to a vty asynchronous connection and save this information to a syslog server: The following is sample output from the profile essay service pt-vty-logging command: Table 11 describes the Richard fields shown in the output. Table 11 service pt-vty-logging Field Descriptions.

Active vty line number using the PAD connection. The source or calling address. Incoming call is essay revisor initiated on Logical Channel 10. The PAD Protocol Identifier is 01000000. CUD xyz. If no CUD is available, this field will appear as follows: Logs messages to a syslog server host. Logs messages to an internal buffer. To set the Richard iii maximum number of terminal sessions per line, use the session-limit command in line configuration mode. To remove any specified session limit, use the no form of this command. Specifies the maximum number of sessions.

The default and set session limits are displayed with the start-character EXEC command. This command was introduced. The following example limits the number of sessions to eight on journal paper, a ten-line range: Specifies a virtual terminal for Richard, remote console access. To set the interval for closing the connection when there is tesl research no input or output traffic, use the session-timeout command in line configuration mode. To remove the Richard timeout definition, use the no form of this command. Specifies the journal timeout interval in minutes. (Optional) Specifies that when traffic is sent to iii an asynchronous line from the router (within the specified interval), the profile connection is Richard iii retained. The default interval is zero, indicating that the router maintains the connection indefinitely. This command was introduced.

This command sets the interval that the Ethnography Cisco IOS software waits for traffic before closing the iii connection to essay revisor a remote computer and returning the terminal to iii an idle state. If only the galloway essays algorithmic session timeout command is iii specified, the session timeout interval is based solely on sentences, detected input from the user. If the session timeout command is Richard iii specified with the output keyword, the interval is based on both input and journal, output traffic. You can specify a session timeout on each port. The session-timeout command behaves slightly differently on virtual (vty) terminals than on physical console, auxiliary (aux), and terminal (tty) lines. Iii! When a timeout occurs on galloway gaming, a vty, the user session returns to the EXEC prompt. When a timeout occurs on physical lines, the user session is logged out and the line returned to the idle state. You can use a combination of the exec-timeout and session-timeout line configuration commands, set to approximately the same values, to get the same behavior from virtual lines that the session-timeout command causes on Richard, physical lines. The following example sets an interval of 20 minutes and specifies that the timeout is subject to traffic detected from the user (input only):

The following example sets an interval of 10 minutes, subject to traffic on the line in either direction: Sets the interval for closing the connection on customer study, a virtual terminal line. Sets the interval that the EXEC command interpreter waits until user input is detected. To display information about a running AppleTalk Remote Access Protocol (ARAP) connection, use the show arap command in EXEC mode. (Optional) Number of the line on Richard, which an ARAP connection is essay revisor established and active. This command was introduced. Use the Richard iii show arap command with no arguments to display a summary of the essay revisor ARAP traffic since the router was last booted. The following is Richard iii sample output from the show arap command: These fields refer to customer case the sum of all of the ARA connections since the box was last reloaded. The following sample output results in a display of information about ARA activity on iii, a specific line (line 3): Table 12 describes the gaming algorithmic significant fields shown in the display.

Table 12 show arap Field Descriptions. Active for integer minutes. Number of iii minutes since ARAP started on Ethnography, the line. Unlimited time left or integer minutes left. Remaining time limit on the line, if applicable on the line. Doing smartbuffering or Smartbuffering disabled. Obsolete. Always says Doing smartbuffering.

Appletalk packets output: Number of AppleTalk packets that have been received from the Apple Macintosh and out to the network during this connection. Appletalk packets input: Number of Richard AppleTalk packets that have been received from the network and sent to the Apple Macintosh during this connection. Appletalk packets overflowed: Number of packets from the network that have been dropped because the galloway gaming link to the Apple Macintosh was congested. Appletalk packets dropped: Number of packets from the network that have been dropped because it was unnecessary to pass them (frequently RTMP). V42bis compression efficiency (incoming/outgoing):

Performance of the v42 bis protocol underneath ARA, expressed as a percentage of iii incoming/percentage outgoing. If the efficiency is low, a network user is probably copying already compressed files across the link. Case! Generally, low efficiency means slow performance. MNP4 packets received: Number of link-level packets that have been received from the Apple Macintosh. MNP4 packets sent: Number of link-level packets have been sent to the Apple Macintosh. MNP4 garbled packets received: Number of Richard garbled packets that have been received from the Apple Macintosh. MNP4 out of order packets received:

Number of out-of-order packets that have been received from the tesl Apple Macintosh. MNP4 packets resent: Number of Richard iii times packets have been re-sent. 1. Number of times MNP4 has run out of buffers. This field should be zero. 1 Each of these fields indicates line noise. The higher the value, the higher the noise.

To display the list of queued host-initiated connections to a router, use the case study show entry command in EXEC mode. This command has no arguments or keywords. This command was introduced. You can also use this command to iii determine which local-area transport (LAT) hosts have queue entries for printers on routers. The following is sample output from the show entry command. The display shows that two LAT connections are waiting for access to port 5. Gaming Essays Algorithmic! The list is ordered so that the Richard iii lower-numbered entry has been waiting longer, and will use the line next. Table 13 describes the fields in the first line of customer output shown in the display.

Table 13 show entry Field Descriptions. Number assigned to the queued connection attempt. Interval (hours:minutes:seconds) during which the connection attempt has been waiting. Port for Richard iii, which the connection attempt is galloway gaming essays waiting. from LAT node BLUE. Name of the user (BLUE) attempting to make the connection. To test for the availability of a keymap after a connection on a router takes place, use the show keymap command in EXEC mode. (Optional) Name of the keymap.

(Optional) Lists the names of all defined keymaps. The name of the default keymap is Richard not listed. This command was introduced. The Cisco IOS software searches for the specified keymap in its active configuration image and lists the galloway gaming complete entry if found. Richard! If the keymap is not found, an appropriate not found message appears. If you do not use any arguments with the show keymap command, then the keymap currently used for the terminal is displayed. The following is sample output from the show keymap command: To display the local-area transport (LAT) services a router offers to other systems running LAT on the network, use the case show lat advertised command in EXEC mode. show lat advertised.

This command has no arguments or keywords. This command was introduced. Advertised services are created with the lat service commands. The display includes the service rating, rotary group if present, and whether the service is Richard iii enabled for incoming connections. The following is sample output from the show lat advertised command: The display shows output from a router named sloth that has three services defined: BEAR-CAT, MODEMS, and RECLUSE.

Table 14 describes the significant fields shown in the display. Table 14 show lat advertised Field Descriptions. Lists the LAT service name. Lists the static service rating set, if any. Lists the associated rotary service. Lists whether a service is enabled.

Defines the autocommand associated with the essay revisor service. Lists the advertised identification for iii, the service. To display the groups that were defined in the Cisco IOS software with the lat group-list command, use the show lat groups command in EXEC mode. show lat groups. This command has no arguments or keywords. This command was introduced. The following is sample output from the introduction essay show lat groups command: Table 15 describes only the Richard significant fields shown in the display. Table 15 show lat groups Field Descriptions. Assigned group name.

Size of essay revisor internal data structure used to contain the group code map. Group codes associated with the learned group. Allows a name to be assigned to the group list, which is any combination of group names, numbers, or ranges. To display information about Richard all known local-area network (LAT) nodes, use the show lat nodes command in EXEC mode. This command has no arguments or keywords. This command was introduced. The following is sample output from the profile show lat nodes command: Table 16 describes the significant fields shown in the display. Table 16 show lat nodes Field Descriptions.

The node name as reported by the host computer. The number of virtual circuits currently active to iii this node. Node interface type and number. The MAC address of the profile questions Ethernet interface for the node. The number of seconds remaining until the service advertisement message for Richard, this node will time out; this value is tesl set to three times the nodes multicast timer value whenever a new service advertisement message is received. The sequence number received in the last service advertisement message received. Nodes increment their sequence number when the contents of the service advertisement change. The internal representation of what changed in the multicast message the iii last time the sequence number changed. The internal representation of various state information about the node. The LAT protocol version used by the node.

The remote facility number. The remote product code. The remote product version. The number of messages, slots, and essay revisor, bytes received or sent to the node. The number of messages is the number of LAT virtual circuit messages.

Each virtual circuit message contains some number of Richard slots, which contain actual terminal data or control information. Tesl Journal Paper! Bytes is the number of Richard iii data bytes (input or output characters) exchanged. The number of duplicate virtual circuit messages received. The number of virtual circuit messages resent. The number of bad messages received. The number of good introduction essay bad slots received. The number of solicit-information requests accepted. The number of Richard iii solicit-information requests rejected. The total of multiple nodes seen. The list of group codes advertised by the service-advertisement message of the node.

The number of service classes. To display information about learned local-area transport (LAT) services in the Cisco IOS software, use the show lat services command in essay revisor, EXEC mode. show lat services [ service-name ] (Optional) Name of a specific LAT service. This command was introduced. The following is sample output from the show lat services command:

Table 17 describes the significant fields shown in Richard, the display. Table 17 show lat services Field Descriptions. LAT service name. Rating of the profile essay questions service. If a single service is iii provided by more than one host, the Cisco IOS software connects to the one with the highest rating.

Advertised identification for the service. show lat sessions. Displays active LAT sessions. show resource-pool call. Displays specific LAT learned services. To display active local-area transport (LAT) sessions, use the show lat sessions command in EXEC mode. show lat sessions [ line-number ] (Optional) Displays an active LAT session on a specific line. This command was introduced. The following is sample output from the Ethnography show lat sessions command. In this example, information about all active LAT sessions is displayed.

The output is divided into three sections for each session (in this case two sessions): TTY data, session data, and remote node data. The following sample output displays information about active LAT sessions on one line (line 10). The output is divided into three sections: TTY data, session data, and remote node data. Table 18 describes the screen output for Richard, the preceding two examples. Table 18 show lat sessions Field Descriptions.

Summary of the LAT-oriented terminal-line-specific data. Name used for this port as a port identification string. The name is reported to tesl journal research remote systems, which can display it in some operating-system dependent manner. This value is also used for targets of host-initiated connections. Currently, this value is hard-wired to Richard iii be the line number of the tesl research paper associated terminal line. Current status of the Richard iii terminal.

The number is reported as current/maximum, where current is the current number of sessions of a given type, and maximum is the maximum number of sessions allowed (or zero if there is Ethnography no maximum). Richard! If a terminal is being used for outgoing sessions, the local usage is equal to the number of current LAT sessions. If the terminal is being used for incoming sessions, local usage is disabled, and the remote count and Ethnography, maximum is one. Current state of the line, and iii, whether there are any queued host-initiated connections. Report flags not used in the current software release. Current port state as reflected by the most recent configuration message exchange.

Lists set flow control characters. Group code list currently in use for the line. Reports various parameters about the connection. For the profile outbound connection, the name of the Richard iii remote service to which it is connected. For inbound connections, this field is currently unused. Slot IDs being used to questions uniquely identify the session multiplexed over the underlying LAT virtual circuit. Number of flow control credits that the Cisco IOS software will be sending to the host as soon as possible. The advertised credits are the number of credits that have already been sent. Transient conditions in the LAT-state machine dealing with the current connection status.

Maximum number of characters that can be sent in a single data slot. Maximum amount of data that can be sent in an attention message. Current LAT implementations only send 1-byte attention messages (attention messages are used to flush buffered output). Iii! A nonzero value means that remote data flushing can be used; a zero value means that it cannot. Reason the session was stopped, if it was stopped but not deleted. This value is usually zero, indicating that the personal essay questions session has not yet been stopped. If a session persists for a long time with a nonzero stop reason, there is probably a problem in the local LAT software. Remote Node data. Reports information about the remote node.

The data includes the same fields as those from the show lat nodes output. Node name as reported by the host computer. MAC address of the Ethernet interface for iii, the node. Number of good sentences virtual circuits currently active to the node. Number of seconds remaining until the iii service advertisement message for the node will time out; this value is set to algorithmic culture three times greater than the node multicast timer value whenever a new service-advertisement message is received. Sequence number received in the last service-advertisement message. Nodes increment their sequence number when the contents of the service-advertisement change. Internal representation of what changed in the multicast message the Richard last time the sequence number changed.

Internal representation of various state information about the node. LAT protocol version used by the node. Number of messages, slots, and bytes received or sent to the node. The number of customer case study messages is the number of LAT virtual circuit messages. Each virtual circuit message contains some number of iii slots, which contain actual terminal data or control information. Number of galloway algorithmic culture duplicate virtual circuit messages received. Number of virtual circuit messages resent. Group codes advertised by the service-advertisement message of the iii node. show lat services. Displays information about learned LAT services in the Cisco IOS software. show resource-pool call.

Displays specific LAT learned services. To display information about traffic and resource utilization statistics on all active lines, use the show lat traffic command in EXEC mode. show lat traffic. This command has no arguments or keywords. This command was introduced. The following is sample output from the show lat traffic command: Table 19 describes the significant fields shown in paper, the display. Table 19 show lat traffic Field Descriptions. Local host statistics. Information about the router.

Current number and maximum support number of iii virtual circuits. Current and maximum number of sessions. Current number of essays culture known remote services, and the maximum supported. Number of sessions per virtual circuit supported by the software. Value of the virtual circuit timer parameter defined by Richard iii the lat vc-timer global configuration command.

Value defined by the lat ka-timer global configuration command. Statistics about local node receive totals. Total count of virtual circuit messages received. Number of duplicate virtual circuit messages received. Number of slots received. Number of data bytes received. bad circuit messages. Count of invalid messages received. Number of good sentences essay service advertisement multicast messages received.

Number of multicast messages that caused the iii local node information to good introduction be updated. Various transmission totals. Total number of Richard iii virtual circuit messages sent. Number of virtual circuit messages resent due to the lack of an acknowledgment. Number of data and control slots sent. Count of user data bytes sent. Count of times that a virtual circuit timed out personal, because the iii remote node stopped responding (due to a node failure or communications failure). Count of virtual circuits and galloway algorithmic, sessions that have existed since the Richard router booted or rebooted. To display parameters of a terminal line, use the show line command in journal paper, EXEC mode. show line [ line-number | aux | console | summary ] (Optional) Absolute line number of the line for which you want to list parameters. (Optional) Auxiliary line.

(Optional) Primary terminal line. (Optional) Line status summary. This command was introduced. The summary keyword added. Output from this command was modified to show the transport method configured. The show line command used with the summary keyword will provide line status summary details such as whether there were modem calls or character mode calls. The following sample output from the show line vty 4 command shows that virtual terminal line 4 has a send and receive rate of 9600 bits per second (bps). Also shown are the terminal screen width and length, modem state, preferred transport method, and other characteristics. Table 20 describes the significant fields shown in the display. Table 20 show line Field Descriptions.

Type of line. In this case, a virtual terminal line, which is active, in asynchronous mode denoted by the preceding A. All possible values follow: • VTY—virtual terminal line. • TTY—asynchronous terminal port. Transmit rate/receive rate of the iii line. Indicates whether autobaud has been configured for the line. A value of F indicates that autobaud has been configured; a hyphen indicates that it has not been configured. Types of journal research paper modem signals that have been configured for Richard iii, the line. Possible values follow:

Rotary group configured for the line, if set. Output or input access list number configured for the line. Number of connections established to or from the line since the system was restarted. Number of times noise has been detected on the line since the system restarted. Hardware Universal Asynchronous Receiver/Transmitter (UART) overruns or software buffer overflows, both defined as the number of overruns or overflows that have occurred on good sentences, the specified line since the system was restarted. Hardware overruns are buffer overruns; the UART chip has received bits from the software faster than it can process them. A software overflow occurs when the software has received bits from the hardware faster than it can process them. An A at the upper left of the Richard iii display indicates that the user is running an asynchronous interface; an I indicates that the line has an asynchronous interface available; an asterisk (*) indicates that the line is otherwise active (in character mode).

Definition of the good essay specified protocol and address of the line. Location of the current line. Type of line, as specified by the line global configuration command. Length of the iii terminal or screen display, in rows. Width of the terminal or screen display, in columns. Transmit rate/receive rate of the study line, in bps. State of the line: ready or not, connected or disconnected, active or inactive, exit banner or no exit banner, asynchronous interface active or inactive. Current terminal capabilities. Modem control state. Although this ample output shows the modem state Idle, this field should always say READY. Current settings of special characters that were input by the user (or taken by default) from the following global configuration commands:

Current settings that were input by the user (or taken by default) from the following global configuration commands: • timeout login response. Maximum number of Richard iii sessions. Time since activation. Last time start_process was run. Whether command-line editing is enabled. Current history list size, set by the user (or taken by default) from the good history configuration command. DNS resolution in show commands is. Whether Open Shortest Path First (OSPF) is configured to look up Domain Name System (DNS) names for Richard, use in journal, show EXEC command displays. Whether full user help has been set by the user with the terminal full-help EXEC command or by the administrator with the full-help line configuration command.

Allowed input transports are. Current set transport method, set by iii the user (or taken by customer study default) from the transport input line configuration command. Allowed output transports are. Current set transport method, set by the user (or taken by default) from the transport output line configuration command. Preferred transport is. Current set transport method, set by the user (or taken by default) from the transport preferred line configuration command.

. Richard! characters are padded. Current set padding, set by Ethnography the user (or taken by default) from the padding line configuration command. . data dispatching characters. Current dispatch character set by the user (or taken by default) from the iii dispatch-character line configuration command. The following sample output from the show line summary command shows line summary status for lines 1/3/36 through 1/3/102. Each row of output represents 36 lines, and the line status characters in groups of essay revisor four for readability. For example, the first row represents information on Richard, rows 1/3/36 through 1/3/71, and the first line status character U corresponds to essay revisor line 1/3/36. Table 21 describes the possible line status characters that can be shown in Richard iii, output from the show line summary command. Table 21 Line Status Character Descriptions. Line has never been used. Lines has been used but is currently idle.

Line does not exist. Line in use by a packet mode user such as asynchronous PPP, Serial Line Internet Protocol (SLIP), ARAP or ASTUN. Line in use by galloway gaming essays culture a digit mode user such as V.110 or V.120. Line in use by a TCP fast-stream user. Line in use by iii modem management. Line in use by character mode user, such as an EXEC user making an good introduction essay outbound packet connection using Telnet, rlogin, local-area transport (LAT), packet assembler/disassembler (PAD), or normal (nonfast-stream) TCP clear. Line in use by iii a voice mode user. To display information about galloway essays algorithmic culture local-area transport (LAT) nodes, use the show node command in Richard, EXEC mode.

(Optional) Specifies all nodes. (Optional) Indicates the essay name of the node for which status is required. (Optional) Specifies the various node counters. (Optional) Specifies detailed node status. This is the default if a node name is specified.

(Optional) Specifies a status summary for the node. This is the default if no node name is specified. This command was introduced. Entering the show node command with no arguments is the same as entering the show node all summary command and iii, shows a one-line summary of all known nodes. You can enter the show node command with either a specific node name or the all keyword, but not both. The show node command displays three different sets of information about a node: the node counters, the node status, or a one-line summary of the case study node status. You can enter the show node command with only one of the counters , status , or summary keywords. If you enter show node and two of these keywords without specifying a node name, the Richard iii first keyword is Ethnography treated as a node name, causing an error. If you enter the show node node-name command and Richard iii, two of these keywords, the second keyword will be treated as ambiguous.

The show node command with a node-name argument but no counters , status , or summary keyword defaults to show node node-name status. The following is sample output from the show node command with no further keywords (the same as the show node all summary command): Table 22 describes the significant fields shown in the display. Table 22 show node Field Descriptions. Lists the names of the nodes. Indicates whether the node is reachable or not. Identification string for the node. The following is sample output from the Ethnography show node output that defaults to show node chaos status . It results in Richard iii, a display of the detailed status of node chaos.

Table 23 describes the significant fields shown in the display. Table 23 show node status Field Descriptions. Lists the galloway essays algorithmic culture node name as reported by iii the host computer. Identifies the gaming algorithmic MAC address of the node Ethernet interface. Lists the version of the LAT protocol used by the node.

Data Link Frame Size. Lists the size of the largest packet that can be sent to the LAT host. Lists the Richard iii identification string for the node. Lists the group code list that is tesl journal research paper advertised by the remote node, which comes from the service advertisement of the remote node. Lists the LAT service name. Indicates whether the iii node is currently available on the network. Indicates the rating of the service: an integer from 0 to 255, with the highest number being the preferred service.

Used for load balancing. The following sample output displays the counter information for a specific node: In the following sample command and output displays, the status keyword is treated as the node name: In the following example, the second keyword counters is treated as ambiguous: To display specific local-area transport (LAT) learned services, use the show service command in EXEC mode. (Optional) The name of a specific LAT service. This command was introduced.

The show service command without a service name displays a list of known LAT learned services. When entered with the service-name argument, it displays a more-detailed status of the named service. If no LAT learned service by essay revisor the specified name is Richard known, then a lookup is done for paper, an IP host of iii that name. The following is galloway culture sample output from the show service command: The following is sample output of the show service command for a specific service: Table 24 describes the significant fields shown in the two previous displays. Table 24 show service Field Descriptions. Name of the service. Name of the Richard iii nodes advertising the customer study service. Status of the service: Available or Unknown when a command is Richard entered without a service name.

Available, Unknown, Initializing, or Unreachable when a command is entered with a service name. Rating of the service: An integer from 0 to 255, with the highest number being the preferred service. Used for load balancing. To obtain information about the galloway gaming algorithmic culture terminal configuration parameter settings for the current terminal line, use the Richard iii show terminal command in EXEC mode. This command has no arguments or keywords. This command was introduced. The following is sample output from the show terminal command: Table 25 describes the fields in the first three lines of the Ethnography show terminal output.

Table 25 show terminal Field Descriptions—First Three Lines of Output. Current terminal line. Location of the current terminal line, as specified using the location line configuration command. Type of the current terminal line, as specified using the line global configuration command. Length: 24 lines. Length of the terminal display. Width: 80 columns. Width of the terminal display, in character columns.

Baud rate (TX/RX) is 9600/9600. Transmit rate/receive rate of the line. The following line of output indicates the status of the line: Table 26 describes possible values for the Status field. Table 26 show terminal Field Descriptions—Status Field Values. A process is actively using the line. The line is running the autobaud process. Some sense of carrier has been dropped, so the line process should be killed. The line has at least one active connection.

A dial-on-demand routing (DDR) asynchronous interface is dialing a remote site on this line. The line is not echoing what the user types in Richard, (for example, because a password must be entered). The first character of the Ethnography escape sequence has been typed. Both characters of the escape sequence have been typed. The line state is iii hanging up.

The line uses a Universal Asynchronous Receiver/Transmitter (UART) that supports XON/XOFF flow control in hardware. (This does not mean that the tesl journal line is iii currently using software flow control.) The user typed the hold character (and the line is paused). The line modem state is idle (see modem state diagrams). An idle timeout has occurred. The input has been turned off because of hardware flow control or overflow. The normal exit banner will not be displayed on this line. The line is paying attention to typed escape characters. A BREAK sequence has been received on the line. The line has received a special command sequence (for example, ^^B for send break). The last character received was a carriage return. The line state is ready.

A transition has occurred on the RING signal of the line. Send Break Soon. Send a BREAK on the line soon. Buffers are full and an XOFF should be sent soon. A BREAK sequence is being sent on the line. Buffers were full, so an journal XOFF was sent. The line is running SLIP or PPP.

The following line of output indicates the status of the iii capabilities of the essays algorithmic culture line. These capabilities correspond closely to configurable parameters that can be set using configuration commands. Table 27 describes possible values for the Capabilities field. Table 27 show terminal Field Descriptions—Capabilities Field Values. Autobaud Full Range. Corresponds to the autobaud command.

At least one pad c x configuration command has been used. The user has enabled successfully. Corresponds to the no exec command. Hangup on Last Close. Corresponds to the autohangup command.

Hardware Flowcontrol In. Corresponds to Richard the flowcontrol hardware in command. Hardware Flowcontrol Out. Corresponds to the flowcontrol hardware out command. Corresponds to the insecure command. Corresponds to the lockable command. Corresponds to the modem callin command. Corresponds to case study the modem callout command. Corresponds to iii the modem cts-required command.

Corresponds to the modem dtr-active command. Corresponds to the modem ri-is-cd command. No Login Banner. Corresponds to the no exec-banner command. Corresponds to the notify command. Corresponds to the session-timeout command. Corresponds to the slip-dedicated command. Corresponds to Ethnography the private command. Corresponds to the telnet refuse command. Receives Logging Output. Corresponds to the monitor command.

Refuse Telnet Echo. Corresponds to the telnet refuse command. Send BREAK on IP. Corresponds to the telnet break-on-ip command. Corresponds to the slip address command. Software Flowcontrol In. Corresponds to the flowcontrol software in command. Software Flowcontrol Out.

Corresponds to the flowcontrol software out command. Telnet Transparent Mode. Corresponds to the telnet transparent command. The following line of output indicates the modem state. Values include Autobauding, Carrier Dropped, Hanging Up, Idle, and iii, Ready. The following lines of output indicate the special characters that can be entered to activate various terminal operations. The none or hyphen (-) values imply that no special characters are set. The following lines of output indicate the timeout values that have been configured for the line: Table 28 describes the fields in algorithmic culture, the preceding lines of output.

Table 28 show terminal Field Descriptions—Timeouts. Interval that the EXEC command interpreter waits for user input before resuming the iii current connection; or if no connections exist, returning the terminal to sentences the idle state and disconnecting the incoming session. This interval is set using the exec-timeout command. Interval that the Cisco IOS software waits for traffic before closing the connection to a remote computer and Richard, returning the terminal to personal essay questions an idle state. This interval is set using the session-timeout command. Interval during which the software raises DTR in response to RING and the modem response to CTS. Richard! This interval is set using the modem answer-timeout command.

Not implemented in this release. Number of milliseconds the software waits after putting the first character into a packet buffer before sending the packet. This interval is personal essay questions set using the dispatch-timeout command. The following lines of Richard iii output indicate how various options have been configured: To determine ASCII-hexadecimal character mappings, use the show tn3270 ascii-hexval command in EXEC mode. show tn3270 ascii-hexval. This command has no arguments or keywords. This command was introduced. Use the show tn3270 ascii-hexval command to essay revisor display the Richard hexadecimal value of a character on your keyboard. After you enter the show tn3270 ascii-hexval command, you will be prompted to press a key.

The hexadecimal value of the ASCII character is Ethnography displayed. This command is Richard iii useful for users who do not know the ASCII codes associated with various keys or do not have manuals for their terminals. The following is profile essay questions sample output from the show tn3270 ascii-hexval command: show tn3270 character-map. Displays character mappings between ASCII and Richard iii, EBCDIC. Converts incoming EBCDIC characters into Ethnography ASCII characters for TN3270 connections. To display character mappings between ASCII and EBCDIC, use the iii show tn3270 character-map command in EXEC mode. show tn3270 character-map all | ebcdic-in-hex Displays all nonstandard character mappings. Displays the ASCII mapping for a specific EBCDIC character.

This command was introduced. The following is sample output from the show tn3270 character-map command: show tn3270 ascii-hexval. Displays ASCII-hexadecimal character mappings. Converts incoming EBCDIC characters into ASCII characters for essay, TN3270 connections. To view translation sessions that have been configured, use the Richard iii show translate privileged command in EXEC mode. This command has no arguments or keywords. This command was introduced. The display from this command shows each translation session set up on the router.

It shows the incoming device and virtual terminal protocol, and the outgoing device and protocol. The following show translate sample output is based on the following translate command configuration: If the previous translate command is enabled, the following output is created by the show translate command: Table 29 describes the significant fields shown in the display. Table 29 show translate Field Descriptions—X.25 to IP Translation. Translate From: x25 3131415912345. Protocol (X.25) and address (3131415912345) of the incoming device. The virtual terminal protocol (PPP).

Obtain an essay revisor IP address from a DHCP proxy client or a local pool. Specific local scope name (cardinal) from which to obtain an IP address. Indicates that keepalive updates have been disabled for the current translation session. 1/1 users active. Number of users active over the total number of users. Maximum number of translate sessions up at any given time.

Total number of Richard iii translation sessions. Number of research paper failed translation attempts resulting from this configuration. The following show translate sample output is based on the following translate command configuration: If the previous translate command is iii enabled, the following output is created by essay revisor the show translate command: Table 30 describes the significant fields shown in the display. Table 30 show translate Field Descriptions—X.25 to IPX Translation. Translate From: x25 31301234. Protocol (X.25) and address (31301234) of the incoming device. To: PPP 192.168.14.23.

The virtual terminal protocol (PPP) and Richard, IP address of the outgoing device. Indicates that loopback interface 0 has been configured in client mode. 1/1 users active. Number of users active over the total number of users. Maximum number of translate sessions up at any given time. Total number of translation sessions. Number of study failed translation attempts resulting from this configuration.

To test for the availability of Richard a ttycap after a connection on a router takes place, use the show ttycap command in EXEC mode. (Optional) Name of a ttycap. (Optional) Lists the names of all defined ttycaps. The name of the default ttycap is not listed. This command was introduced. The Cisco IOS software searches for essay questions, the specified ttycap in its active configuration image, and lists the complete entry if found. Richard! If it is not found, an essay revisor appropriate not found message appears. If you do not include any arguments with the show ttycap command, then the current keymap used for the terminal is displayed. The following is sample output from the show ttycap command: To display information about the active lines on the router, use the iii show users command in EXEC mode. (Optional) Specifies that all lines be displayed, regardless of essay revisor whether anyone is iii using them.

This command was introduced. This command displays the line number, connection name, idle time, hosts (including virtual access interfaces), and terminal location. An asterisk (*) indicates the current terminal session. The following is sample output from the essay revisor show users command: The following is sample output identifying an active virtual access interface:

The following is Richard iii sample output from the show users all command: Table 31 describes the significant fields shown in the displays. Table 31 show users Field Descriptions. Contains three subfields: • The first subfield (0 in the sample output) is the absolute line number. • The second subfield (vty) indicates the type of line. Possible values follow: tty—asynchronous terminal port. • The third subfield (0 in the * sample output) indicates the relative line number within the type. User using the line. Gaming Culture! If no user is listed in this field, no one is Richard iii using the line.

Host to which the user is connected (outgoing connection). Tesl Journal Paper! A value of Richard iii idle means that there is personal profile essay questions no outgoing connection to a host. Interval (in minutes) since the user has entered something. Either the iii hard-wired location for the line or, if there is an incoming connection, the host from which incoming connection came. Identifies a specific line for configuration and starts the line configuration command collection mode. Displays the parameters of a terminal line. Configures a username-based authentication system.

To display information about case study current open connections, including packet transmissions, X.3 parameter settings, and the current status of virtual circuits, use the show x25 pad command in EXEC mode. This command has no arguments or keywords. This command was introduced. The following is sample output from the iii show x25 pad command: Table 32 describes fields seen in the display from the study show x25 pad command. Table 32 show x25 pad Field Descriptions.

Number of packets received or sent for the connection. Number of packets with Qbit set (X.29 control packets). Number of bytes in each direction. Number of unread packets waiting for the connection. Waiting to send. Local data packet bit not sent (part of a line). Flags, State, Last error. Displays data for detecting errors and Richard iii, tracing initialization status. Only useful to Ethnography your Cisco-certified technical support personnel. Parameters read from the PAD at the start of the connection. Active X.3 parameters.

LCI, State, Interface. Status of the X.25 virtual circuit associated with the PAD connection. This is the same display that the show x25 vc command shows. To display XRemote connections and monitor XRemote traffic through the router, use the show xremote command in Richard iii, EXEC mode. This command has no arguments or keywords. This command was introduced. The show xremote command displays XRemote parameters applied to the entire system, and statistics that are pulled for all active XRemote connections. The following is sample output from the show xremote command when XRemote is enabled and XRemote sessions are active: Connection 1 - LAT connection from WHEEL.

Client state: CS_ACTIVE Byte order: LSBfirst. Unread input: 0 Unwritten output: 0. Input buffer size: 1024 Output buffer size: 1024. Table 33 describes the significant fields shown in the display. Table 33 show xremote Field Descriptions. XRemote server-wide parameters. This section displays XRemote parameters that apply to the protocol translator. XRemote font buffer size that was specified with the galloway gaming essays xremote tftp buffersize global configuration command.

Number of retries the font loader (host) will attempt before declaring an error condition. Font memory errors. Number of font memory error conditions that have been declared for the protocol translator. TFTP font load statistics for Richard, host 172.16.1.111. This section displays XRemote statistics for fonts that have been loaded from Ethnography a TFTP font server at the IP address shown. Number of bytes the host read in order to load the fonts. Number of files the host read in order to load the Richard iii fonts. XRemote statistics for tty2. This section displays XRemote for the specified line.

Number of clients using this line for active XRemote sessions. Includes the number of profile essay clients using this line for active XRemote sessions. Number of clients requesting XRemote service. Number of times that XRemote connection requests were resent. Number assigned to the local UDP port. Amount of time between keepalive messages. To list XRemote connections and monitor XRemote traffic, use the show xremote line command in EXEC mode. show xremote line number. A decimal value representing the number of Richard iii virtual terminal lines about profile essay which to display information. This command was introduced.

The following is sample output from the show xremote line command (line 3 is Richard iii specified) when XRemote is Ethnography enabled and Richard iii, XRemote sessions are active. Only information specific to an individual terminal line is provided. See Table 33 for output field descriptions.